4. Fit the outside shield by guiding it over the reader unit. Ensure
that the reader unit lies flush with the outside shield.
5. Fasten the outside shield with the screw.
6. Using an authorised locking medium, check whether the ILS-I
INTERNAL DOOR HANDLE SETcan read media. The handle is
functioning correctly when the LED of the reader unit lights up
green and the latchbolt is pulled back when the lever handle is
actuated.
Page 44 of 83 Wide shield replacement handle set ILS-I
7.5 Battery replacement
Overview: Use of master media
Help & troubleshooting Technical data
Maintenance & disposal
Operation Administration Assembly Basic information
To Next Page
Loading...
