Chamberlain LA400 - Additional Items Needed for Installation; Tools Needed

8
INTRODUCTION » ADDITIONAL ITEMS NEEDED FOR INSTALLATION + TOOLS NEEDED
ADDITIONAL ITEMS NEEDED FOR INSTALLATION
PERMANENT FASTENERS FOR WARNING SIGN
EARTH GROUND ROD (OPTIONAL)
POWER WIRE:
120 VAC POWER WIRE (STRANDED COPPER WIRE)
Wire Gauge 16 100 feet (30 m)
Wire Gauge 10 1000 feet (305 m)
24 VAC TRANSFORMER (STRANDED COPPER WIRE)
Wire Gauge 14 500 feet (152 m)
Wire Gauge 12 1000 feet (305 m)
OR
TOOLS NEEDED
During assembly, installation and adjustment of the operator, instructions will call for
tools as illustrated below.
Screwdriver
Adjustable End Wrench
Tape Measure
2
1
Pencil
Carpenter's Level
Clamps
Phillips Head Screwdriver
Deep Well Sockets
and Wrench
1/2", 5/8", 7/16", 9/16"
and 1/4"
Hammer
Drill
Drill Bits
1/2", 3/16", 5/16"
and 5/32"
Wire Cutters (Optional)Wire Strippers (Optional)
Welder (Optional)