1 Site Design Guidelines
1
This document describes how to design a project site for the ChargePoint® CP6000 networked charging
station for electric vehicles. This includes guidelines and best practices for electrical infrastructure and
capacity planning, construction, and concrete work required prior to installation of charging stations and
cellular signal requirements.
Note: CP6000 charging stations are available in several configurations. The images in this guide might not
match your station exactly; however, the information is applicable unless otherwise noted.
IMPORTANT: Ensure the installation complies with all applicable codes and ordinances.
Access ChargePoint documents at chargepoint.com/guides.
Document Content Primary Audiences
Datasheet Full station specifications Site designer, installer, and
station owner
Site Design Guide Civil, mechanical, and electrical
guidelines to scope and construct
the site
Site designer or engineer of
record
Concrete Mounting Template
Guide
Instructions to embed the charging
station template in a concrete pad
with anchor bolts and conduit
placement
Site construction contractor
Construction Signoff Form Checklists used by contractors to
ensure the site is correctly
completed and ready for product
installation
Site construction contractor
Installation Guide Anchoring, wiring, and powering on Installer
Operation and Maintenance
Guide
Operation and preventive
maintenance information
Station owner, facility manager,
and technician
Service Guide Component replacement
procedures, including optional
components
Service technician
Declaration of Conformity Statement of conformity with
directives
Purchasers and public
1
To Next Page
Loading...
