Chatillon DFE I User Manual

DF II Series User Manual 69
Use the UP or DOWN navigation key to position
the cursor arrow next to the “Filters” option. Select
ENTER.
DISPLAY FILTER SETUP
From the Main Filter Setup display, you may set
theDisplayandPeaklterrate.Thecursorarrow
willappearnexttotheDisplaylteroption,“Disp
10 Hz”. This is the default display update rate. To
change the Display Filter rate to 4Hz, depress the
UP or DOWN navigation key. The display rate will
change between 10Hz and 4Hz. Select ENTER
when the desired rate is displayed.
PEAK FILTER SETUP
From the Display Filter setup, depress F1 (Peak) to
change the Peak Filter setup. Selecting F1 (Peak)
will position the cursor arrow next to the “Peak”
label. Use the UP and DOWN arrow to adjust the
peak sample rate to the desired setting. The peak
sample rate default is 10KHz (10kHz) and may be
changed to 1KHz, 100 Hz and 10Hz respectively.
SelectENTERtoapplylterrate.

Chatillon DFE I Specifications

General

Brand	Chatillon
Model	DFE I
Category	Measuring Instruments
Language	English