4．Double click the folder that you have configured to store the static data, you will see
the folder(s) created by the i76 system automatically and named by the date which is decide
by GPS time when you start to log data.
5．Select the destination folder and double click it, and then two folders named as different
data format (hcn and rinex) will be displayed.
6．Select the data format that you have configured to save the static data, you will find the
static raw data.
Tip - For HCN files, the name of the file is represented as XXXXXXXD DD NN, where XXXXXXX
is the SN of the receiver, D DD is day of year, and NN is the recording session.
WARNING – The static data will be saved in the “record_1” folder, by default. Old files
will be deleted if the storage space is full. If you configure not to auto delete old files when
the memory is low, the receiver will stop data logging.
To Next Page
Loading...
