4.3.7 HCPPP Settings
4.4 Data Recording Menu
Use the Data Logging menu to set up the receiver to log static GNSS data and to view the
logging settings. You can configure settings such as observable rate, recording rate, continuous
logging limit, and whether to auto delete old files when memory is low. This menu also provides
the controls for the FTP push feature:
4.4.1 Log Settings Submenu
Here shows the data logging status, including internal and external storage usage and data
logging status of each session. Also, users can configure the data logging settings for each
session, including recording name, store location, storage limit, store formats, start time, etc.
To edit the settings of each session, click the Modify button to the right of the required
session, and then the Recording Edit screen appears:
To Next Page
Loading...
