4. Configuring Through a Web Browser
Supported browsers:
• Google Chrome
• Microsoft Internet Explorer version 10, or higher
To connect to the receiver through a web browser:
1．Turn on the Wi-Fi of the receiver.
2．Search the wireless network named as GNSS-XXXXXXX (the SN of your receiver) on your
computer, and then establish the connection.
3．After the successful connection between your computer and the receiver, enter the IP
address (192.168.1.1) of the receiver into the address bar of the web browser on your
computer:
4．The web browser prompts you to enter a login account and password:
The default login account for the receiver is:
• Login Account: admin
• Password: password
Note – Tick remember me o ptio n, and then the browser will remember the Lo gin Acco unt and
Password yo u entered.
5．Once you log in, the web page appears as follows:
To Next Page
Loading...
