the receiver is stationary over 30 seconds or the pole hit the ground toughly.
4．The pole cannot be shaken when point is collected.
5．Initialization is required:
➢ when the RTK is turned on every time;
➢ when IMU module is turned on every time;
➢ when receiver drops at working;
➢ when the pole is tilted more than 65 degree;
➢ when the receiver is stationary more than 10 minutes;
➢ when the RTK rotates too fast on the matching pole (2 rounds per second);
➢ when the pole hit the ground toughly.
▪
To Next Page
Loading...
