CHCNAV i76 - User Log Submenu; Firmware Update Submenu; GNSS Board Upgrade Submenu

Equipment Setup and Operation
CHCNAV i76 GNSS USER GUIDE | 2024-05 P a g e |
43
4.8.5 User Log Submenu
Use this submenu to download the user log. Tap Download to download current user log;
Tick items that you want to see on the user log and tap confirm button to confirm selected user
log.
4.8.6 Firmware Update Submenu
Use this submenu to load new firmware to the receiver across the network. Tap the Browse
button to locate the upgrade file → tap Confirm button to confirm the selected upgrading file
and start upgrading.
N otes-
It may take about 3 or 4 minutes to complete the firmware upgrading. Do not touch the
power button or unplug the power until the upgrading process finishes, or damage will be
caused to the receiver.
The receiver will restart after the firmware upgrading is done, so users need to reconnect the
receiver with your computer via Wi-Fi, and then log-in the receiver through a web browser to
continue the configuration.
4.8.7 GNSS Board Upgrade Submenu
Use this submenu to upgrade GNSS Board. Use this submenu to load new board to the