CHCNAV iBase GNSS - Page 28

Front Panel Operation
CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 28
Rover UHF
Mode Rover UHF
The title of this configuration
screen.
Protocol CHC
Press Enter to select current
protocol (CHC, Transparent,
TT450s)
Channel 1 456.0500
Press Enter to change the channel
from 0 to 9
Baud 9600
Press Enter to select Baud (4800, 9600
and 19200)
OK
Press Enter button to save the settings
and back to the top-level menu, and
then this working mode can take
effect.
Cancel
Press Enter button to cancel the
settings and back to the second-
level menu.
Rover NTRIP
Mode Rover NTRIP
The title of this configuration
screen.
Status Not Login in in
Indicates the login status.
OK
Press Enter button to save the settings
and back to the top-level menu, and
then this working mode can take
effect.
Cancel
Press Enter button to cancel the
settings and back to the second-
level menu.
Back
Press Enter button to back to the top-
level menu.