CHCNAV iBase GNSS - Configure the Working Mode

Front Panel Operation
CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 25
Back
Press Enter button to back to the last
menu.
OK
Press Enter to complete settings.
Back
Press Enter button to back to the
top-level menu.
Info
SN 322584
PN 118032
-015701
-020104
Register 2020-09-16
Sleep Time 1min
Version 2.0.7
IMEI 861529049455435
Language English
Back
Describe the main information of this
machine. SN displays the Serial Number
of the receiver. PN displays the Part
Number of the receiver. Register
displays the expiry date of registration
code. Press Enter to select sleep time
including 5s, 10s, 30s, 1min, 30min.
Version displays the firmware version.
IMEI is International Mobile Equipment
Identity which is used to identify the
RTK. Press Enter to change languages.
Press back to go back to the previous
menu.
3.2 Configure the Working Mode
7 working modes are provided for quickly setting up an RTK base station or rover station. Users
can configure each working mode through the front panel as follows:
Top-level Menu
Second-level Menu
Description
Ultra Base
Reserved for the Ultra Base mode.
Base External
UHF
Mode Base External UHF
The title of this configuration
screen.
Format CMR
Press Enter to select correction format
(RTD, CMR, RTCMv2.3, RTCMv3 and
RTCMv3.2).
OK
Press Enter button to save the settings
and back to the top-level menu, and
then this working mode can take
effect.
Cancel
Press Enter button to cancel the
settings and back to the second-
level menu.