Front Panel Operation
CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 23
3 Front Panel Operation
The front panel contains one LCD screen, two indicator LEDs, and two buttons. The operating
controls are all located on the front panel.
3.1 Main Operation Menus
The top-level menu of the front panel includes 6 parts: Status, mode, static and info. Status
shows satellites, receiver solution and the power percentage. Mode is the important part
which illustrate the work mode and users can select the mode according to their needs. Static
is used to set static mode. Info is the basic information of firmware such as SN, PN and etc.
The details of main operation are as follows and they are concluded two tables. The first table
includes 5 parts: Info, SV, Power, Data and Set and the second table displays details of Data.
Indicate the total number of satellites
that have been tracked and the number
of satellites tracked of each
constellation, where G represents GPS, R
represents GLONASSS, C represents
BeiDou, S represents SBAS and E
represents Galileo.
To Next Page
Loading...
