CHCNAV iBase GNSS - IO Settings Menu

Configuring Through a Web Browser
CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 49
4. To download a file, left-click the name of the target file → download the file according
to the prompts.
5.5 IO Settings Menu
Use the IO Settings menu to set up all receiver outputs and inputs. The receiver can output
CMR, RTCM, Raw data, Ephemeris data, GPGGA, GPGSV, on TCP/IP, UDP, serial port, or
Bluetooth ports.
5.5.1 IO Settings Submenu
The following figure shows an example of the screen that appears when you select this
submenu.