Check Point 5000 Series - Lights out Management

5000 Appliances Hardware
Check Point 5000 Appliances Getting Started Guide | 41
Item Component Description
1 LED indicator for
each power supply
unit
x Off - Power supply is not connected to an electric
outlet
x On (Amber) - Power off
x On (Green) - Power on
2 Power supply units Connect to an electric outlet. One module is included. An
optional dual redundant hot-swappable power supply is
available in the 5600 and 5800 appliances.
You can use the cable restraints to avoid accidental
removal of the power supply cable.
3 Alarm button If a power supply cable is not connected to the outlet, an
alarm sounds continuously. Press this button to turn off
the alarm.
4 Main power switch
5 Fixed cooling fans Numbered from right to left.
In the 5800 appliance - 1, 2, 3, 4.
In the 5200, 5400, and 5600 appliances - 1, 2, 3.
Lights Out Management
The Check Point Lights Out Management (LOM) card lets you use a dedicated
management channel to remotely control Check Point appliances. Lights Out
Management can also work when the appliance is turned off or not responding.
Lights Out Management is an optional feature on the 5200, 5400, and 5600 appliances.
It is included by default with the 5800 appliance.
For more about using Lights Out Management, see the
Lights Out Management
Administration Guide
.