Chery A11 2003 - Page 478

CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
Air throttle cable adjustment
Ad ustment procedure: j
Adjust the gap between the idle
positioning block and the
e.
2. he
sitioning block and the
T;
3.
ir throttle cam
isassembly procedure:
. Lift the vehicle;
oil pan and gasket;
valve plate
throttle cable
5. wl spring for cam
6.
1.
adjusting turnbuckl
Permissible gap: 0~1mm
Check the distance between t
idle po
adjusting turnbuckle when WO
Distance scope: 39.0~40.0mm
If the distance exceeds this scope,
adjust the adjusting nut;
A
D
1
2. Remove the
3. Remove the control
assembly;
4. Remove the air
from the cam;
Remove the pa
positioning and air throttle cam;
Remove the return spring on the
cam;
46