CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
3. Use the transmission fluid to
lubricate piston D;
Turn over the transmission by
180 degree and face the side of
driven shaft upwards;
ote: Preheat the transmission
the i
outp
Turn over the case by 90
degree and face the parking
lock mechanism upwards;
Install 1
st
gear one-way overrun
4. Install piston D;
5.
N
case to 70 in order to facilitate ℃
nstallation of driven shaft back
ut bearing’s outer racer.
7.
8.
clutch so that it is engaged
correctly;
152
To Next Page
Loading...
