CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
rn the bolt clockwise by
mm. Then knock the bolt’s
ange into deformed sha
157
27. Tu
12
fl pes so
that it sinks into the sunk pit on
the gear;
Tighten the auxiliary back
output gear with a tightening
torque of 150Nm.
28.
. Install the output gear gap
detector KA-001-655;
. Screw the adjusting bolt
downwards until the gauge
index begins to move;
Take off the parking carrier
rod;
29
30
To Next Page
Loading...
