Touch-it XELO
Operating Instructions
Copyright / © Christ Electronic Systems GmbH 18 / 47 March 2017, Revision 17
a member of the Christ Company Group Document No.: E461201
3.1.2 Changing Boot Priority
3.1.2.1 T45N
In order to boot from a USB Drive the following settings must be done.
In the BIOS Setup mode choose the Boot Menu and select Hard Drive BBS Priorities.
Set the Boot Option #1 in such a way that the USB Device is first position in the boot list, by
pressing “Enter” and select the USB Device using the Page-Up/Down Keys.
Save this configuration by pressing “F4” and selecting “Yes” afterwards.
3.1.2.2 CPU GX-415GA / i5-4300U
In order to boot from a USB Drive the following settings must be done.
In the BIOS Setup mode choose the Boot Menu and select Hard Drive BBS Priorities.
Set the Boot Option #1 to the USB Device, by pressing “Enter” and select the USB Device.
Save this configuration by pressing “F4” and selecting “Yes” afterwards.
3.1.2.3 CPU i5-6300U
In order to boot from a USB Drive the following settings must be done.
In the BIOS Setup mode choose the Boot Menu.
Set the Boot Option #1 to the USB Device, by pressing “Enter” and select the USB Device.
Save this configuration by pressing “F4” and selecting “Yes” afterwards.
To Next Page
Loading...