Safety Symbols
DANGER – High voltage.
Explanation: To avoid injury, death of personnel, or damage
to the instrument, the operator must refer to an explanation in
the instruction manual.
High temperature: This symbol indicates the temperature is
now higher than the acceptable range of human. Do not
touch it to avoid any personal injury.
Protective grounding terminal: To protect against electrical
shock in case of a fault. This symbol indicates that the
terminal must be connected to ground before operation of
equipment.
WARNING
The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, or the like, which, if not correctly
performed or adhered to, could result in personal injury. Do
not proceed beyond a WARNING sign until the indicated
conditions are fully understood and met.
CAUTION
The CAUTION sign denotes a hazard. It may result in
personal injury or death if not noticed timely. It calls
attention to procedures, practices and conditions.
vii