Chroma 19032-P - Preset and Program Settings; Preset Setting Configuration

Electrical Safety Analyzer 19032-P Quick Start Guide
25
Please follows the below procedures to process.
2. When title display “MEMORY SETUP”, press [U], [V] keys or Function
Key [NEXT PAGE] to move the highlighted cursor to the memory name
which want to delete.
3. Press Function Key [DELETE] and then show confirm window.
4. Press [ENTER] to confirm or press Function Key [EXIT] to cancel.
4.6 Test for Preset Setting
4.6.1 Operation Method
1. When title shows “PRESET SETUP”, press [U], [U] keys to move the
highlight cursor to the parameter item which want to set.
2. Press numeral key/character key or Function Keys to set this item
parameter data.
3. Press [ENTER] to confirm or press [CLR] to reset.
4.6.2 Simple Setting Wizard
1. When title shows ”PRESET SETUP”, press [ENTER] key to move the
highlight cursor to the parameter item which want to set.
2. Press numeral key/character key or Function Keys to set this item
parameter data.
3. When the highlighted cursor on the last parameter, press [ENTER] key
will go to test parameter setting menu directly for user continuous
setting.