Chroma 19073 User Manual

xi
Revision History
The following lists the additions, deletions and modifications in this manual at each revision.
Date
Version
Revised Sections
Jan. 2003
1.0
Complete this manual.
April 2003
1.1
Modify ”Specifications (18°C ∼ 28°C RH ≤ 70%)”
“Standard Accessory”
“Rear Panel”
“RS-485 Interface”
“Solving Problems”
Dec. 2003
1.2
Modify “Introduction”
“Rear Panel”
“Operation”
“Auto Range”
“Calibration Procedure”
“Command Description”
Delete “RS-485 Interface”
Add “RS485 Interface (Optional)”
March 2004
1.3
Add “The Danger of Operating”
“Storage. Freight. Maintenance. Disposal”
Modify “Specifications (18ºC ∼ 28ºC RH ≤ 70%)”
“Rear Panel”
Sep. 2004
1.4
Modify “Product Features”
“Optional Accessory”
“Rear Panel”
“PROGRAM Parameter Setting”
“How to Perform Tests”
“RS485 Interface (Option)”
March 2005
1.5
Modify “Introduction”
“System Setup”
“PROGRAM Parameter Setting”
“How to Perform Tests”
“KEY LOCK Function”
“Command List”
“Command Description”
Aug. 2006
1.6
- Add “CE Statement of Conformity”
- Add the description of “Power Cord (W12 030080)” to the section
of “Standard Accessory”
- Add the section of “Initial Inspection”
Nov. 2006
1.7
- Modify the description of Disposal in “Storage, Freight,
Maintenance & Disposal”
- Modify the descriptions of RS-485 command in the section of
“Command Description”.

Chroma 19073 Specifications

General

Model	19073
Category	Test Equipment
Output Frequency	50Hz/60Hz
Power Rating	500VA
AC Test Voltage	5 kVAC
DC Test Voltage	6kV
IR Test Voltage	50 V to 1 kV
Interface	RS-232, USB
Insulation Resistance	1MΩ to 50GΩ
Type	Electrical Safety Tester