Chroma 19073 - Page 14

xii
March 2007
1.8
Add “Material Contents Declaration”
Delete the description of Disposal in “Storage, Freight, Maintenance
& Disposal”
Dec. 2007
1.9
Delete the following:
- the column of Part Number in the section of “Standard
Accessory” & “Optional Accessory”.
Modify the following:
- the description of “I-RUS” in the section of “PROGRAM
Parameter Setting”.
- the description of “Inrush” in DC Mode table in the section of
“Command Description”.
Dec. 2008
2.0
Modify the following:
- the description of “Hipot” item in the section of “Specifications”.
- the description of table in the section of “Standard Accessory”.
- “(3) System Parameter Setting Table” in the section of “System
Setup”.
- “PRESET parameter function table” in the section of “PRESET
Parameter Setting”.
- the menu of “Open/Short Detection Mode (OS)” in the section of
“PROGRAM Parameter Setting”.
- “Test Steps (OS) Standby Menu” & “Description Table for Test
Result” in the section of “How to Perform Tests”.
- “CONFIRM Window” in the section of “Change User Password”.
- the description in the section of “Command Description”.
Nov. 2009
2.1
Add the descriptions of “RS-232 interface”.
Jun. 2010
2.2
Add two new items in the section of “Solving Problems”.
Dec. 2010
2.3
Modify “Material Contents Declaration”.
Mar. 2011
2.4
Add the section of “Timing Diagram”.
Sep. 2011
2.5
Add the related description of “IR Range Selection”.
Mar. 2012
2.6
Modify the following:
- “CE Declaration”.
− Figure 2-4 in the section of “Remote Control”.
- description of “Time T2” in the section of “Timing Diagram”.
Dec. 2012
2.7
Modify the figure of item (2) in the section of “DCA Calibration (DC/IR
MODE)”.
Dec. 2013
2.8
Add Standard warnings to the section of “Solving Problems”.
Jan. 2015
2.9
Add the warning to the section of “The Danger of Operating”.
Sep. 2016
3.0
Modify “CE Declaration of Conformity”.
Dec. 2016
3.1
Modify the following:
− Rear panel figure in the section of “Rear Panel”.