A one-touch Stow ‘n Go Assist button is located on the B-pillar trim panel, just in front of the
power sliding door.
Using the Stow ‘n Go Assist Feature
NOTE:
• The button is only functional when the
power sliding door is open and the vehicle is
in PARK. If the door is not open or the
vehicle is not in PARK when the button is
pushed, the front seat will not move and a
message will be displayed in instrument
cluster display.
• If the power sliding door is closing when the
button is pushed, the front seat will not
move and a message will be displayed in the
instrument cluster display.
1. Push and release the Stow ‘n Go Assist button. The front seat cushion and seat back will move
as necessary to a location that will allow space for the second row Stow ‘n Go seat movement.
2. Perform the second row Stow ‘n Go seat movement. Refer to “Second Row Stow ‘n Go” for
further information.
3. Push and release the Stow ‘n Go Assist button a second time. The front seat cushion and seat
back will return to the original starting location.
NOTE:
• To abort seat operation while seat is in motion, push the Stow n’ Go Assist button, or push the
front power seat button to stop the seat movement. Pushing the Stow ‘n Go Assist button
again will return the front seat to the original starting location.
• The Stow ‘n Go Assist system includes obstacle detection. When the system detects an
obstacle, the seat will stop, reverse direction, and return to the previous location. A message
will be displayed in the instrument cluster indicating that an obstacle has been detected.
• If the front seat is already in a location that will allow space for Stow ‘n Go of the second row
seat, the front seat will not move and a message will be displayed in the instrument cluster.
• If calibration of the front seat is lost, the seat will automatically re-calibrate when the Stow ‘n
Go Assist button is pushed. This may result in the seat cushion moving forward and downward,
before moving to the location that will allow space for the second row Stow ‘n Go seat
movement.
Second Row Stow 'n Go
For Manual Seats: To stow the seat in the floor, move the front seat all the way forward using the
manual seat adjustment bar. Move the seat back all the way forward using the recliner handle
located on the outboard side of the cushion. Move the seat height to at least mid position using
the height adjuster handle in the outboard side of the cushion.
Stow ‘n Go Assist Button
GETTING STARTED
79
To Next Page
Loading...
