For Power Seats: Push the Stow ‘n Go Assist button located on the B pillar trim (if equipped.)
Refer to "Stow 'n Go Assist - If Equipped" in this section for instructions.
1. To access the storage bin, place the lock rod in the locked position.
NOTE:
• Push the lock rod inward for the locked position.
• Pull outward on the lock rod for the unlocked position.
• For information on storage bin function with the seats rearward refer to “Internal Equip-
ment” in “Getting To Know Your Vehicle” in the Owner’s Manual on www.chrysler.com/
en/owners/manuals for further information.
2. Pull the latch located near the second row seat to open the floor panel.
3. Pull the floor panel and position it toward the front seats while folding the top half down and
rest it against the front seats.
Push Panel Forward
GETTING STARTED
80
To Next Page
Loading...
