Package List
The control panel is known as the “heart
and brain” for alarm system, which is used
for receiving and processing signals from
wireless sensors and remote controls. Users
can make settings freely with the keypad
and LCD display. In case of emergency, the
panel hoots on site and dials the pre-stored
alarm phone numbers automatically. When
Pet-Immune PIR Motion Detector is an intelligent passive
infrared motion sensor, designed to detect human movements
within an approximate range of 0 to 8 meters from the detector.
The detector includes fuzzy logic to minimize false alarms from
unwanted heat sources. With power saving feature, the detector
will enter sleeping mode after the second activation within 3
minutes to save power.
CG-B11 Control Panel x1
PIR-910 Pet-Immune PIR Motion Detector x 1
The remote control is compact and
portable; it is convenient to carry it to
arm, disarm, part arm the alarm system
and also make an emergency call.
The Door/window contact can be installed on
doors, windows and any other objects that open
and close. The sensor transmits signals to the
control panel when a magnet mounted near the
sensor is moved away.
The RFID tag is for disarming the
system and unlocking the
electronic door lock (if connected).
Supply power to the control panel. In
case of power failure, two built-in
backup batteries in the panel will
support 5-hour standby.
Connect PSTN land line to the
control panel. In case of
emergency, the panel will
hoot on site and call the pre-
stored alarm phone number
to notify users.
Brackets (Wall-Mounted and
Desktop) for Control Panel x 2
Bracket for PIR Motion
Detector x 1
Double-Sided Tape for
Door/Window Contact x 2
Screws and Wall
Plugs x 4
User Manual x 1
DWC-102 Wireless Door/Window Contact x 1 RC-80 Wireless Remote Control x 2
Tag-26 RFID Tag x 2
AC Adapter x 1
Telephone Cable x 1
01 02
users pick up the phone, they are able to hear alarm voice message and choose to
monitor on site or disarm the system, etc.
As a PSTN/GSM dual networks alarm system, B11 panel will switch to GSM network
automatically to call the user for alert when the PSTN network is cut off.
To Next Page
Loading...
