Chuango B11 - Check Event Logs; Connect to Electronic Lock; Connect to CMS; Add CMS Phone Number

1
2
User ID for CMS
Please see details at Page 40: Connect to CMS
Upload Arm Report
Please see details at Page 41: Connect to CMS
Upload Disarm Report
Please see details at Page 41: Connect to CMS
Reset
Log on the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Reset”, press to reset the system to default setting. [ ] [ ] [Enter]
Note: All system settings will be restored to default setting. Reset will not delete the accessories
that has already coded to the control panel.
If user forget the admin code and cannot setup the system, please contact local
distributors.
4. Check Event Logs
Note: [ ] [ ] Hold or to skip the event logs.
Users can check the event logs freely. 150 event logs are traceable.
Log on the menu, press or , choose “History”, press .[ ] [ ] [Enter]
Press or , choose the event log you need to track, press . Relevant [ ] [ ] [Enter]
event log time and alarm way will be shown.
Connect to Electronic Lock
Please ignore this if user is not intended to put this alarm as access control.
This alarm only sends on/off signal to electronic door lock, please refer to related
electronic door lock manual for details.
1
2
3
4
Connect to CMS
Please ignore this step if users don't need to connect to CMS center.
When connected to CMS center, control panel will upload contact ID to CMS center
automatically once intrusion is detected.
Add CMS Phone Number
When CMS center phone no. is stored, the control panel will auto dial to CMS center
automatically when alarm.
Log on the menu, choose “Phone Numbers”, press .[Enter]
Press or , choose “Add Phone Number”, press .[ ] [ ] [Enter]
Press or , choose “CMS Number1”or “CMS Number2”, press .[ ] [ ] [Enter]
Input CMS phone no, press [Enter]. If group extension telephone no. is used to connect
to the CMS center, please add 0# or 9# before the phone no. you plan to store.
Note: If user wants to check or edit the pre-stored phone no., enter “CMS Number1~2” to check or
edit.
1
2
3
1
2
3
4
Delete CMS Phone Number
Log on the menu, choose “Phone Numbers”, press .[Enter]
Press or , choose “Del Phone Number”, press .[ ] [ ] [Enter]
Press or , choose in order “CMS Number1~2”, press .[ ] [ ] [Enter]
Delete stored CMS phone no., Press . [Enter]
User ID
It is supplied by CMS center. After it is stored, CMS center can exactly know user’s
location according to the ID number.
Log on the menu; press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “User ID”, press .[ ] [ ] [Enter]
LCD display will show “Input 4 Digits”, input 4 digits user ID, press .[Enter]
39
40
1
2