Chuango B11 - Page 22

Turn On/Off Arm/Disarm Beep for Wired Siren
Log on the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Siren Setup”, press .[ ] [ ] [Enter]
Press or , choose “Wired Siren”, press .[ ] [ ] [Enter]
Press or , choose “Arm/Disarm Beep”, press .[ ] [ ] [Enter]
Press or , choose “On” or “Off”, press [ ] [ ] [Enter]
“On” is to turn on arm/disarm beep for wired siren; “Off” is to turn off arm/disarm beep
for wired siren.
Default setting is “On”; arm/disarm beep is on.
Wireless Siren
Wireless siren is connected to control panel through wireless connection.
Turn On/Off Wireless Siren
Log on the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Siren Setup”, press .[ ] [ ] [Enter]
Press or , choose “Wireless Siren”, press .[ ] [ ] [Enter]
Press or , choose “Siren On/Off”, press .[ ] [ ] [Enter]
Press or , choose “On” or “Off”, press [ ] [ ] [Enter]
“On” is to turn on the wireless siren; “Off” is to turn off the wireless siren.
Default setting is “On”; the wireless siren is on.
Turn On/Off Arm/Disarm Beep for Wireless Siren
Log on the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Siren Setup”, press .[ ] [ ] [Enter]
Press or , choose “Wireless Siren”, press .[ ] [ ] [Enter]
Press or , choose “Arm/Disarm Beep”, press .[ ] [ ] [Enter]
Press or , choose “On” or “Off”, press [ ] [ ] [Enter]
“On” is to turn on arm/disarm beep for wireless siren; “Off” is to turn off arm/disarm
beep for wireless siren.
Default setting is “On”; arm/disarm beep is on.
Built-in Siren
Built-in siren is the siren inside the control panel.
Turn On/Off Built-in Siren
Log on the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Siren Setup”, press .[ ] [ ] [Enter]
Press or , choose “Built-in Siren”, press .[ ] [ ] [Enter]
Press or , choose Siren Siren On/Off, press .[ ] [ ] [Enter]
Press or , choose Off/Low/High, press [ ] [ ] [Enter]
Choose "Low" or "High" to adjust the volume; "Off" is to turn off the built-in siren.
The default setting is "Low".
Turn On/Off Arm/Disarm Beep for Built-in Siren
Log on the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Siren Setup”, press .[ ] [ ] [Enter]
Press or , choose “Built-in Siren”, press .[ ] [ ] [Enter]
Press or , choose “Arm/Disarm Beep”, press .[ ] [ ] [Enter]
Press or , choose “On” or “Off”, press [ ] [ ] [Enter]
“On” is to turn on arm/disarm beep for built-in siren; “Off” is to turn off arm/disarm beep
for built-in siren. Default setting is “On”; arm/disarm beep is on.
Set Ringing Time for All Sirens
Log on the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Siren Setup”, press .[ ] [ ] [Enter]
Press or , choose “Siren Alert Time”, press .[ ] [ ] [Enter]
Input the ringing time, press .[Enter]
Siren ringing time is calculated as seconds, default setting is 300 seconds. If 0 second
is set, siren will not ring.
37
38
1
2
3
4
5
1
2
3
4
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5