1
1 IMPORTANT RECOMMENDATIONS
3.1 Main control board for machines with one refrigerating circuit
3.4 Control and display console
3.5 Connection via RS485 serial port for BMS or control console and Multiconnect with 500 kW module
4.2 Expansion (additional) boards 1 and 2
4.3 Man-Machine Communication
5.1 Selecting an authorised access level
5.2 Accessing the various access levels
5.3 Configuring access levels on the controller
5.4 Management of the numeric codes for accessing levels 2 and 3
5.5 Classification of the menus and their functions
6 LIST OF PARAMETERS PER ACCESS LEVEL
7 MANAGEMENT OF AERO-CONNECT PARAMETERS
8.5 MACHINE PARAMETERS menu
8.6 ADJUSTMENT PARAMETERS menu
8.7 OPERATION PARAMETERS menu
9 MANAGEMENT OF THE ON/OFF INPUTS
9.1 Automatic machine operation control
9.2 Load shedding control
9.4 Fan fault (circuits 1 and 2)
9.5 Expansion valve fault
9.6 Phase controller fault
9.8 Compressor protection
9.9 Manual HP pressure switch fault on circuit 1 or 2
9.10 Setpoint selection via on/off input
9.11 Variable setpoint via 4-20 mA input
9.12 Operating mode selection
10 MANAGEMENT OF THE ANALOGUE INPUTS
11 MANAGEMENT OF THE WATER PUMPS
11.3 Pump management if P2 = 3 (reversible air-to-water) + heating mode + P111 = boiler
11.4 Unseizing and switching the pumps
12.1 Frost protection of pumps and heat exchangers while unit is off:
12.2 Water loop winter protection