Ciena 3902 - Installation; Important Safety Information

2-1
3902 Service Delivery Switch Hardware Installation and Start-up Manual
009-3205-001 Standard Revision D
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
Installation 2-
The 3902 is designed for deployment in indoor locations and controlled
environments. It can be mounted on a desktop or on a wall.
This chapter provides installation instructions. It discusses the following
topics:
• Important Safety Information
• Installation Overview
• Mounting the 3902
• Installing the Power Supply
• Installing the SFP
• Installing the Interface Cabling
• Initial configuration
Important Safety Information
Please review the safety information before beginning the installation.
WARNING
The chassis of the 3902 should never be opened under any
circumstances. Opening the chassis will void the warranty.
The system chassis must be returned to Ciena for service or
replacement.
Power supply modules and transceivers are field-replaceable,
however, the modules or transceivers must be returned to
Ciena for service or replacement.