Ciena 3902 - Accessing the CLI Using Telnet

Turning Up the System 3-11
3902 Service Delivery Switch Hardware Installation and Start-up Manual
009-3205-001 Standard Revision D
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
Procedure 3-6
Accessing the CLI Using Telnet
Follow these steps to access the CLI using a Telnet session.
Step Action
1 Use a Telnet client to connect to the 3902.
Telnet <IpAddress>
2 At the login prompt enter a valid user name and password.
Example:
3920 00:02:A1:07:B0:80
SAOS is True Carrier Ethernet TM software.
3920 login: su
Password:
SAOS is True Carrier Ethernet TM software.
Welcome to the shell.
You have logged into the CLI using Telnet.