3-14 Turning Up the System
3902 Service Delivery Switch Hardware Installation and Start-up Manual
009-3205-001 Standard Revision D
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
Procedure 3-9
Logging Out of the System
Follow these steps to log out of the system.
Note: Before you disconnect from the system, ensure that you have
saved the configuration using the
configuration save command.
Step Action
1 At the prompt, enter the following command:
exit
2 Remove the cable connecting the console port to the serial port on the
terminal or PC.
You have logged out of the system.
To Next Page
Loading...
