Turning Up the System 3-13
3902 Service Delivery Switch Hardware Installation and Start-up Manual
009-3205-001 Standard Revision D
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
Procedure 3-8
Setting the System Host Name
Follow these steps to configure a system host name in the CLI.
Step Action
1 Set the system host name.
system set host-name <newhostname>
For example, to change the system prompt from the default prompt to
3902_alpha_MainSt_CO>:
system set host-name 3902_Alpha_MainSt_CO
2 Save and complete the process.
configuration save
You have set the System Host Name.
To Next Page
Loading...
