Installation 2-3
3902 Service Delivery Switch Hardware Installation and Start-up Manual
009-3205-001 Standard Revision D
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
Mounting the 3902
The 3902 can be mounted on a wall or desk top. Desktop installation simply
involves removing the unit from the packaging and placing it on the desk.
Wall mount installation is slightly more involved.The back of the 3902 unit has
keyhole slots that are used to mount the system. See Figure 2-1. When
correctly wall mounted, the faceplate of the unit will be oriented so that it is
facing downward.
Figure 2-1
3902 Bottom View
Required Tools and Accessories
To wall mount the 3902 you will need the following:
• Power drill
• Two #6 or #8 self tapping screws for drywall
• Screwdriver
For a procedure see “Mounting the 3902” on page 2-7.
To Next Page
Loading...
