!
WARNING
Read and understand this entire Manual and your employer’s safety practices before installing,
operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer’s best judgement,
the Manufacturer assumes no liability for its use.
CIGWELD WeldSkill 155 and 185 Welding Inverters
Instruction Manual Number 0-5492 for:
Part Numbers W1008155 and W1008185
Published by:
CIGWELD Pty Ltd
CIGWELD An ESAB Brand
71 Gower Street,
Preston, Victoria, Australia, 3072
+61 3 9474 7400 +61 3 9474 7391
www.cigweld.com.au
Copyright 2017
CIGWELD Pty Ltd
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the
publisher is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for any
loss or damage caused by any error or omission in this Manual, whether such error
results from negligence, accident, or any other cause.
For Printing Material Specification refer to document 47x1915.
Publication Date: 17-08-2017
Revision Date: 07-09-2017
Record the following information for Warranty purposes:
Where Purchased: ____________________________________
Purchase Date: ____________________________________
Equipment Serial #: ____________________________________
i
To Next Page
Loading...
