Manual 0-5492 5-17 MIG (GMAW) WELDING
5.13 CIGWELD MIG Wire Selection Chart
DESCRIPTION DIAMETER PACK PART NUMBER APPLICATION
WELDSKILL
SOLID
WELDING
WIRE
0.6mm Minispool 0.9kg WS0906
General purpose welding wire suitable for the
all positional Gas Metal Arc Welding (GWAW)
of mild and low alloy steels, used in general
fabrication and for welding of light to medium
gauge sheet and tubular steel sections. Note
that a suitable shielding gas is required.
0.6mm Handispool 5kg WS5006
0.8mm Minispool 0.9kg WS0908
0.8mm Handispool 5kg WS5008
0.9mm Minispool 0.9kg WS0909
0.9mm Handispool 5kg WS5009
WELDSKILL
GASLESS
WELDING
WIRE
0.8mm Minispool 0.9kg WG0908
WeldSkill Gasless wire is an all positional
self-shielded flux cored wire recommended
for single pass welding applications only. It
is excellent for single-pass lap, fillet and butt
welding of thin gauged galvanised and mild
steels.
0.8mm Handispool 4.5kg WG4508
0.9mm Minispool 0.9kg WG0909
0.9mm Handispool 4.5kg WG4509
AUTOCRAFT
316LSI SOLID
STAINLESS STEEL
MIG WIRE
0.8mm Minispool 1kg 721285
General purpose all positional stainless steel
wire providing excellent results when used
with correct shielding gas. Suitable for the
general welding of a wide range of stainless
steels (300 & 400 series).
0.8mm Handispool 5kg 720288
0.9mm Handispool 5kg 720283
AUTOCRAFT
AL5356 SOLID
ALUMINIUM
MIG WIRE
0.9mm Minispool 0.5kg 721223
Excellent general purpose Aluminium MIG
wire suitable for the welding of a wide
range of wrought and cast Aluminium alloys
containing Magnesium. Note that a suitable
shielding gas is required.
1.0mm Minispool 0.5kg 721224
1.0mm Handispool 2kg 723224
AUTOCRAFT
SILICON BRONZE
MIG WIRE
0.8mm Handispool 5kg 720159
Used for lower strength welding of steels
in automotive applications. It can also be
used for welding copper-silicon alloys in hot
water systems, heat exchangers and marine
components.
NOTE: MINISPOOL = 100MM DIAMETER, HANDISPOOL = 200MM DIAMETER
Table 5-1: Cigweld MIG Wire Selection Chart
To Next Page
Loading...
