DECLARATION OF CONFORMITY
According to
The Arc Welding Power Source Directive AS 60974.1-2006 (equivalent to IEC 60974-1 Ed. 2.1)
The EMC Directive IEC 60974-10:2014 published on 06 February 2014
Type of equipment
Welding Inverter Power Source
Type designation etc.
Welding Performance
Brand name or trade mark
Cigweld
Manufacturer or his authorised representative established within the EEA
Name, address, telephone No:
Cigweld Pty Ltd
71 Gower Street
Preston, Victoria, Australia, 3072
Phone: +61 3 9474 7400
The following harmonised standard in force within the EEA has been used in the design:
AS 60974.1-2006, Arc Welding Equipment - Welding Power Sources (IEC 60974-1:2000, MOD)
IEC 60974-10-2014, Arc Welding Equipment - Part 10: Electromagnetic Compatibility (EMC) Requirements
AS 1674.2-2007, Safety in Welding and Allied Processes
Additional Information: Restrictive use, Class A equipment, intended for use in location other than resid
By signing this document, the undersigned declares as manufacturer, or the manufacturer’s authorised
representative established within the EEA, that the equipment in question complies with the safety
requirements stated above.
Date Signature Position
25-07-2017
Vice President,
Ken Konopa Global Welding
2017
To Next Page
Loading...
