22
Maintenance
(b) (a)
Rock Burner
Main Burner
Burner Chamber Lining:
After initial 200 hours of operation, the chamber lining must be inspected. Cracks in lining may occur
and should be regularly inspected and monitored. If cracks expand excessively a new lining kit
should be ordered to replace worn lining. Do not run machine if cracks are wide enough to allow
flame to contact the metal combustion chamber walls or if any piece has broken loose. Do
not attempt to repair cracks.
CONTACT WITH LINING MAY CAUSE SKIN OR EYE IRRITATION,
WEAR LONG SLEEVE, GLOVES, AND GOGGLES WHEN
INSPECTING LINING.
Remove burner mount bolts (a) and pull out burner and mount. Inspect lining (b) for excessive
cracking. If cracks exceed guidelines, contact your CIMLINE dealer to purchase a replacement
kit.
Burner
This machine has 2 burners. There are several items that need to be inspected periodically on the
burners. These items include the burner nozzle, electrode and head position, and the electric eye.
Please refer to the burner manual on how to perform each of these operations in this manual.
CAUTION
To Next Page
Loading...
