Cinderella FREEDOM - Appliance Component Orientation; General Maintenance Instructions; End Product Characteristics; Customer Maintenance

22
1
2
3
4
5
6
7
ID PART DESCRIPTION
1 Control panel w/display
2 Lid
3 Seat
4 Ash container with insert
5 Front cover
6 Stop pin
7 Temperature safety
3.10 APPLIANCE ORIENTATION
4. GENERAL MAINTENANCE INSTRUCTIONS
This manual includes both customer maintenance and the maintenance to be performed by professionals
in accordance with the necessary expertise and authorisations.
A smooth-running air circulation system is critical to keep your toilet functioning properly. Particles
generated during the incineration process can clog the catalyst and exhaust pipe over time, and it is
important to regularly maintain these parts to ensure proper functionality.
In order to ensure optimal operation and extend the lifetime of your Cinderella Freedom appliance you
will need to set aside a little time for preventive maintenance. Good maintenance routines will give you
lower operating costs and cause less wear on the product. We strongly advise our customers to perform
frequent maintenance as follows:
1. Empty the toilet frequently. Do not base your use on the maximum limit of the appliance.
2. Always clean the ash container and insert when emptied (see section 4.2.1).
3. Always perform the steam cleaning after each box of bowl liners (500 uses) (see section 4.2.2).
4. Always observe the end result characteristics when emptying the toilet. Deviations in the end result
may indicate the need for maintenance or service (see section 4.1).
CAUTION!
Before performing maintenance, always make sure that the toilet is not in incineration
mode and that the toilet is suciently cooled.