CipherLab 8200 User Manual

97
Chapter 4 BASIC Commands
Shift / Capital Lock Keyboard
This setting can force the command SEND_WEDGE
to treat the keyboard type to be a shift lock
keyboard or a capital lock keyboard. This settin
g will be effective only when the keyboard type
selected is PCAT (all available languages), PS2-30, PS55, or Memorex Telex.
 To set “Capital Lock”, add 4 to the value of the second element of WedgeSetting$
(Wedge_2$).
 To set “Shift Lock”, add 6 to the value of the second element of WedgeSetting$
(Wedge_2$).
Digit Transmission
This setting instructs the command SEND_WEDGE
which group of keys is used to transmit digits,
whether to use the digit keys on top of the alphabetic keys or use the digit keys on th
e numeric
keypad.
 To set “Use Numeric Keypad to Transmit Digits”
, add 2 to the value of the second element of
WedgeSetting$ (Wedge_2$).
Note: DO NOT set “Digits’ Position” and “Shift/Capital Lock Keyboard” unless you are
certain to do so.
3
RD
ELEMENT: INTER-CHARACTER DELAY
A millisecond inter-character delay, in the range of 0 to 255, can be added before
transmitting each character. This is used to provide some response time for PC to
process keyboard input.
For example, to set the inter-character delay to be 10 millisecond, the third element of
WedgeSetting$ can be defined as,
Wedge_3$ = CHR$(10)

CipherLab 8200 Specifications

General

IP Rating	IP54
Display Type	LCD
Barcode Scanner	Laser
Connectivity	RS-232
I/O Ports	RS-232