CipherLab RS36 User Manual

40
Terminal Emulator User Guide
ALARM
VT ALARM
Featured settings on Alarm are as follows:
Setting
Description
Control Reader By
Command
Enable the host service to send commands in order to turn on/off the reader
module. Deselected by default.
 Enable Command: Assign a command (escape sequence) for turning
on the reader module.
 Disable Command: Assign a command (escape sequence) for
turning off the reader module.
You can also refer to Beeper/Vibrator settings in ReaderConfig
1
to make
the mobile computer sound or vibrate each time the reader module is
enabled/disabled by the given command.
Setting
Description
Default
Sound Tap to select a sound from the pop-up list
or tap the User Defined radio button to
locate a wav file.
Mute
Sound File
Name
When User Defined is selected in the
Sound setting, tap it to locate a wav file to
play each time the reader module is
enabled/disabled by the given command.
--
Vibration
Duration
Select the amount of time to vibrate each
time the reader module is
enabled/disabled by the given command.
0 sec
Note: ReaderConfig is an application developed by CipherLab to manage the barcode reader
integrated on the mobile computer.

CipherLab RS36 Specifications

General

Brand	CipherLab
Model	RS36
Category	PDA
Language	English