42
Terminal Emulator User Guide
Featured settings on Alarm are as follows:
Message Alarm Sets the mobile computer to sound or vibrate when data is transmitted to the
host.
Sound Tap to select a sound from the pop-up list
or tap the User Defined radio button to
select a wav file.
Mute
Sound File Name When User Defined is selected in the
Sound setting, tap it to locate a wav file
from the device.
--
Vibration
Duration
Select the amount of time to vibrate.
Configure vibration duration between 0
and 5 sec (in increments of 0.5 sec).
0 sec
Error Alarm Sets the mobile computer to sound or vibrate when an error occurs during data
input. Errors include incorrect data format, incorrect input field etc. (but not
login error).
Sound Tap to select a sound from the pop-up list
or tap the User Defined radio button to
select a wav file.
Mute
Sound File Name When User Defined is selected in the
Sound setting, tap it to locate a wav file
from the device.
--
Vibration
Duration
Select the amount of time to vibrate.
Configure vibration duration between 0
and 5 sec (in increments of 0.5 sec).
0 sec
To Next Page
Loading...
Need help?
General
