CipherLab RS36 User Manual

46
Terminal Emulator User Guide
OR
You can load a profile key:
1) Transfer a key file (*.pem or *.ppk) to your mobile computer.
2) Tap “Authentication Type” to choose the item “Key File”
3) Under Authentication, tap “Advance”, and then tap “Key File”.
4) Tap the plus sign to find the file with correct path and tap on “Next”.
5) To complete managing the key file, specify the passphrase and tap on “Done”.
The other settings are depicted as follows:
General Options
Use TCP No-Delay Enable this option to enhance the performance of small-amount
data transmission between Server and client Device. However, this
function might result in excessive traffic of short packets.
No Pseudo-Terminal on Host The “pseudo-terminal mode” is fundamental for VT (UNIX) host
system to build up Emulator sessions between client Devices.
Disable it if necessary.
No Host Shell Enable this option to have TE not run shell or command after
connecting to the remote host server. This option is applicable only
when:

CipherLab RS36 Specifications

General

Brand	CipherLab
Model	RS36
Category	PDA
Language	English