Raption
92
Instruction Manual
Please, wait until the new configuration is being applied to the Charge Point. A message is
displayed informing the progress:
Once finished, please do not forget to apply changes pressing ‘Upload certificates’ in the
screen lower part and to save changes using ‘Save’ button in the screen upper right part.
Go to the Setup Webpage → ‘Integrations’ tab → ‘SSL Certificates’ tab
When working with ‘secure’ connections, HTTPS, a certificate from the backoffice (normally
a ‘bundle’ file) may be needed to assure proper communication with the charging station.
Depending on the case, select the proper option and press Browse button in order to upload
the certificate. Most common case is ‘CS Server CA’:
To Next Page
Loading...
