Circutor Raption Series - Page 93

Raption
93Instruction Manual
Go to the Setup Webpage → ‘Integrations’ tab → ‘Configuration keys’ tab
Parameter Description
Heartbeat interval Number of seconds between Heartbeats.
Note: setting this value to 0 disables the Heartbeat.
Metervalues sample
interval
Number of seconds between MeterValue during an ongoing Charge
Transaction.
Note: setting this value to 0 disables the MeterValue.
Local white-list Enabled: Local list of authorized users.
Disabled: Local list of authorized users.
When done, please do not forget to save changes using ‘Save’ button in the screen upper
right part.