Circutor RGU-10 - Powering the device after the breaking device

13
Instruction Manual
RGU-10, RGU-10C
3�4�1�2�- Powering the device after the breaking device
The following has to be taken into consideration in the event of powering device after the break-
ing device.
1�- The breaking device has to be a manually resettable device.
2�- After dripping, the device is disconnected losing all information on the reasons for the trip.
The system is reset only by resetting the breaking device. It is reconnected by the power supply.
NL1 L2
L3
1S1
1S2
Type
WGC
1S
1
1S
2
Reset
Test
1 2 4
5 6 8 9
10
11
13
14
15
UTILIZACIÓN
USE
ON / OFF externo
External ON / OFF
Disparo por BOBINA DE EMISIÓN
- Rearme Automático mediante corte de
alimentación
Trip by SHUNT COIL
- Automatic reclose by power supply out
Figure 6: 24 ��� 230 Vac power supply