Contents
xix
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Ethernet to VLAN—Bridged Interworking 21-2
Configuring L2VPN Interworking 21-2
Verifying the Configuration 21-3
Configuration Examples of Ethernet to VLAN—Bridged 21-3
Ethernet to VLAN over LS—Bridged: Example 21-4
Ethernet to VLAN over AToM—Bridged: Example 21-4
Routed Interworking 21-4
Restrictions for Routed Interworking 21-5
Ethernet/VLAN to ATM AAL5 Interworking 21-5
Prerequisites of Ethernet/VLAN to ATM AAL5 Interworking 21-6
Restrictions of Ethernet/VLAN to ATM AAL5 Interworking 21-6
ATM AAL5 to Ethernet Local Switching—Bridged Interworking 21-8
ATM AAL5 to VLAN 802.1Q Local Switching—Bridged Interworking 21-9
ATM AAL5 to Ethernet Port AToM—Bridged Interworking 21-9
ATM AAL5 to Ethernet VLAN 802.1Q AToM—Bridged Interworking 21-10
ATM to Ethernet—Routed Interworking 21-11
Configuration Tasks and Examples 21-12
Local Switching 21-12
AToM 21-14
Ethernet/VLAN to Frame Relay Interworking 21-17
Prerequisites of Ethernet/VLAN to Frame Relay Interworking 21-17
Restrictions for Ethernet/VLAN to Frame Relay Interworking 21-17
FR DLCI to Ethernet Local Switching—Bridged Interworking 21-19
FR DLCI to VLAN 802.1Q Local Switching—Bridged Interworking 21-20
FR DLCI to Ethernet Port AToM—Bridged Interworking 21-20
FR DLCI to Ethernet VLAN 802.1Q AToM—Bridged Interworking 21-21
Frame Relay to Ethernet—Routed Interworking 21-22
Configuration Tasks and Examples 21-23
Local Switching 21-23
AToM 21-24
ATM to Frame Relay—Routed Interworking 21-27
Configuration Tasks and Examples 21-28
Local Switching 21-28
AToM 21-29
Verifying L2VPN Interworking 21-30
CHAPTER
22 Configuring Multilink Point-to-Point Protocol Connections 22-1
Multilink Point-to-Point Protocol 22-1
Feature History for Multilink PPP 22-2
To Next Page
Loading...
