3-9
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
OL-22669-01
Chapter 3 Operation
System Tab
Step 3 Set the Text Overlay settings:
• Date/Time Overlay: Select Show to display the date and time in the live view overlay. The default
setting is Hide.
• Camera Name Overlay: Select Show to display the device name in the live view overlay. The
default setting is Hide.
Step 4 Select the display position for the overlay from the Position drop-down menu. Selections include Top
Right, Top Center, Top Left, Bottom Right, Bottom Center, and Bottom Left.
Step 5 Click the Save button to save the settings, or click the Reset button to clear all of the information you
entered without saving it.
Generating a System Log
Step 1 Click the System tab.
Step 2 Click the Generate System Log button to create a system log that can be used by technical support.
Rebooting the Camera
Step 1 Click the System tab.
Step 2 Click the Reboot Camera button to restart the camera. Rebooting the camera does not change the
configured camera settings.
Restoring All Camera Defaults
This process cannot be undone; all user and custom settings will be lost.
Step 1 Click the System tab.
Step 2 Click the Restore All Camera Defaults button to restore the camera’s factory default settings.
Note If the camera is not connected to a Dynamic Host Configuration Protocol (DHCP) network, the
IP address settings for the camera will be lost and the server will not recognize the camera.
DHCP On is the default setting for the camera IP address.
Refer to the following sections for more information:
• Turning Off DHCP, page 3-11
To Next Page
Loading...
