Depending on how your system administrator sets up the phone,
programmable feature buttons (on each side of the phone screen) provide
access to:
•
Phone lines and intercom lines
•
Speed-dial numbers (speed-dial buttons, including the Line Status
speed-dial features)
•
Web-based services (for example, a Personal Address Book button)
•
Call features (for example, a Privacy button)
Buttons illuminate to indicate status:
•
Green, steady: Active call or two-way intercom call
•
Green, flashing: Held call
•
Amber, steady: Privacy in use, one-way intercom call, DND active,
or logged into Hunt Group
•
Amber, flashing: Incoming call or reverting call
•
Red, steady: Remote line in use (shared line or Line Status)
•
Red, flashing: Remote line on hold
Programmable feature
buttons
3
Depending on how your system administrator sets up the phone, enable
softkey options displayed on your phone screen.
Softkey buttons4
Transfers a call.Transfer button5
Creates a conference call.Conference button6
Places an active call on hold.Hold button7
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 User Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
9
Features of Your Cisco Unified IP Phone
Buttons and Hardware
To Next Page
Loading...
Need help?
General
