Cisco 7600 Series User Manual

1-8
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-08
Chapter 1 SIP and SPA Product Overview
Power Management
Power Management
SPAs and SIPs consume chassis power, and, you must make sure the chassis is within the power budget
on Cisco 7600 series routers.
Table 1-8 SIP and SPA Power Consumption
SIP Power Consumption (Maximum in Watts)
Cisco 7600 SIP-200 240
1
Cisco 7600 SIP-400 265
1
SPA
1-Port Channelized STM-1/OC-3 SPA 15.14
2-Port Channelized T3 SPA 11.24
4-Port Channelized T3 SPA 13.14
8-Port Channelized T1/E1 SPA 9.4
2-Port OC-3c/STM-1 ATM SPA 24.6
4-Port OC-3c/STM-1 ATM SPA 24.8
1-Port OC-12c/STM-4 ATM SPA 25.1
1-Port OC-192c/STM-64 POS/RPR SPA 23.8
2
1-Port OC-192c/STM-64 POS/RPR XFP
SPA
11
3
1-Port OC-192c/STM-64 POS/RPR VSR
Optics SPA
11
2-Port OC-3c/STM-1 POS SPA 13.07
4-Port OC-3c/STM-1 POS SPA 13.82
1-Port OC-12c/STM-4 POS SPA 12.75
1-Port OC-48c/STM-16 ATM SPA 38
1-Port OC-48c/STM-16 POS SPA 10.5
2-Port OC-48c/STM-16 POS SPA 13.21
4-Port OC-48c/STM-16 POS SPA 15.19
2-Port Clear Channel T3/E3 SPA 7.8
4-Port Clear Channel T3/E3 SPA 8.5
IPSec VPN SPA 40
1-Port 10-Gigabit Ethernet SPA 17.4
3
2-Port Gigabit Ethernet SPA 12.9
5-Port Gigabit Ethernet SPA 13.1
3
10-Port Gigabit Ethernet SPA 15
3
4-Port and 8-Port Fast Ethernet SPA 16.2
1-Port Channelized OC-3 STM1 ATM
CEoP SPA
19
4

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13