Cisco 7600 Series User Manual

2-12
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-08
Chapter 2 Overview: Cisco 7600 Series SIPs
Cisco 7600 SSC-400 Overview
Cisco 7600 SSC-400 Overview
The following sections describe the SPA services carrier (Cisco part number 7600-SSC-400):
• Cisco 7600 SSC-400 Processor, page 2-12
• Cisco 7600 SSC-400 LED, page 2-12
• Cisco 7600 SSC-400 Physical Specifications, page 2-13
Cisco 7600 SSC-400 Processor
The processor on a Cisco 7600 SSC-400 is described in Table 2-13.
Cisco 7600 SSC-400 LED
The Cisco 7600 SSC-400 has one LED, as shown in Figure 2-9.
Figure 2-9 Cisco 7600 SSC-400 Faceplate
The Cisco 7600 SSC-400 LED is described in Table 2-14.
Table 2-13 7600-SSC-400 Processor
Type Speed Description
CPU 400 megahertz (MHz) internal operating
frequency
Broadcom 1125 MIPS-based design
STATUS
2
0
3
1
SERVICES
SPA CARRIER
7600-SSC-400
116438
Table 2-14 Cisco 7600 SSC-400 LED
LED Label Color State Meaning
STATUS Red On The Cisco 7600 SSC-400 has encountered an error.
Green On The Cisco 7600 SSC-400 is online.
Yellow On The Cisco 7600 SSC-400 is loading.
Off Off The Cisco 7600 SSC-400 is powered off.

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13